C.M. Connelly wrote: > "ST" == Skylar Thompson <[email protected]> > > ST> Did you either you or Tom have perforated floor vents? I > ST> can't quite figure out the scale, but it seems like the > ST> front casters might be small enough to slip into a hole. > > The data sheet for the lift [0] says that the standard- and > straddle-based lifts have 2" casters in the front and 8" wheels; > the counterweight lift has 4" fixed wheels in the front and 5" > swivel casters in the rear. > > Claire > FYI - even for a spreader/straddle lift, I think you'll find you save a lot of money with prestolifts.com and it's a good, solid product.
See http://www.prestolifts.com/page150.html You'll spend about 1/4 of what you would spend for a server lift, plus you can modify the wheels if you prefer poly vs hard plastic, vs another wheel. Plus, it's a hydraulic lift mechanism vs. a hand crank as some of the more expensive server products have. Oh, and make sure that the lift you order will fit through your doors.. _______________________________________________ Tech mailing list [email protected] http://lopsa.org/cgi-bin/mailman/listinfo/tech This list provided by the League of Professional System Administrators http://lopsa.org/
