On Sun, Apr 11, 2010 at 06:47:45PM +0100, Owain Ainsworth wrote:
> The tarball that may be found at http://xenocara.org/intel-current.tgz
> contains an update to the intel 2.9.1 driver (the last one that
> supported userland modesetting) with a load of backports for bugfixes
> and performance improvements from drivers up to 2.11.
>
> In order to test this, you will need INTELDRM_GEM defined in your kernel
> option INTELDRM_GEM in your kernel config, or a patch to i915_drv.h in
> /sys/dev/pci/drm will suffice) since this driver does not support
> operation without kernel memory mamangement (it tries, but it seems
> broken in many places).
> Then reboot into a GEM kernel to test. Please test this if you have
> access to the hardware because soon GEM will be the default so anything
> that is broken needs to be fixed soon. If you don't test and your stuff
> breaks you can consider it to be your fault.
>
> Please let myself and matthieu@ know of any testing results, positive or
> negative.
This doesn't seem to work for me. I'll provide what information I can
now; but I'm in a hurry and I'll *try* to be available, but I may not
have internet access until Saturday.
This machine, a Thinkpad SL510, worked fine with the Xenocara/the driver
from a snaphot; I compiled Xenocara (not just the driver - I got compile
errors) for the newer version. (So note that I've never tried this
Xenocara with the old driver; I'm sorry, I'm in a hurry...)
If I use this new driver with a non-INTELDRM_GEM kernel, the screen
(computer?) freezes as soon as X starts. Is this expected?
More seriously, if I do use a kernel with the simple configuration
provided below then the screen (computer?) freezes after a short while
(I *think* it's triggered by scrolling in Firefox but not by anything in
an xterm, but I'm not sure.)
Xorg.conf, dmesg and Xorg.0.log follow. I've added diffs to dmesg and
Xorg.0.log for the old and new kernel.
Thanks for your work!
Joachim
--- kernel configuration ---
include "arch/amd64/conf/GENERIC.MP"
option INTELDRM_GEM
----------------------------
--- Xorg.conf ---
# We only need to specify the FontPath, so we use defauls whereever possible.
Section "Device"
Identifier "Intel GM45 video driver"
Driver "intel"
EndSection
Section "Files"
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
# package ghostscript-fonts
FontPath "/usr/local/share/ghostscript/fonts/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# package terminus
FontPath "/usr/local/lib/X11/fonts/terminus/"
EndSection
-----------------
--- dmesg ---
OpenBSD 4.7-current (GENERIC.MP_WITH_INTELDRM_GEM) #0: Wed Apr 21 16:27:07 CEST
2010
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP_WITH_INTELDRM_GEM
real mem = 2003517440 (1910MB)
avail mem = 1940152320 (1850MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xe0010 (44 entries)
bios0: vendor LENOVO version "6JET65WW (1.23 )" date 10/19/2009
bios0: LENOVO 28477LG
acpi at bios0 not configured
mpbios0 at bios0: Intel MP Specification 1.4
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU T6570 @ 2.10GHz, 2095.10 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU T6570 @ 2.10GHz, 2094.75 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG
cpu1: 2MB 64b/line 8-way L2 cache
mpbios0: bus 0 is type PCI
mpbios0: bus 2 is type PCI
mpbios0: bus 5 is type PCI
mpbios0: bus 8 is type PCI
mpbios0: bus 16 is type ISA
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
cpu0: unknown Enhanced SpeedStep CPU, msr 0x06114a2306004a23
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 2094 MHz: speeds: 14800, 1200 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 2 int 16 (irq 10)
drm0 at inteldrm0
"Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 16 (irq
10)
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 21 (irq
10)
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 19 (irq
10)
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 19 (irq
10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: apic 2 int
22 (irq 10)
azalia0: codecs: Realtek ALC269, Intel/0x2802, using Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 2 int 17 (irq
11)
pci1 at ppb0 bus 2
"JMicron SD/MMC" rev 0x00 at pci1 dev 0 function 0 not configured
sdhc0 at pci1 dev 0 function 2 "JMicron SD Host Controller" rev 0x00: apic 2
int 16 (irq 10)
sdmmc0 at sdhc0
"JMicron Memory Stick" rev 0x00 at pci1 dev 0 function 3 not configured
"JMicron xD" rev 0x00 at pci1 dev 0 function 4 not configured
ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 2 int 16 (irq
10)
pci2 at ppb1 bus 3
ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: apic 2 int 18 (irq
10)
pci3 at ppb2 bus 4
ppb3 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: apic 2 int 19 (irq
10)
pci4 at ppb3 bus 5
iwn0 at pci4 dev 0 function 0 "Intel WiFi Link 1000" rev 0x00: apic 2 int 19
(irq 10), MIMO 1T2R, BGS, address 00:1e:64:6b:9a:7c
ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 2 int 17 (irq
11)
pci5 at ppb4 bus 6
ppb5 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x03: apic 2 int 16 (irq
10)
pci6 at ppb5 bus 8
re0 at pci6 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D (0x2800),
apic 2 int 17 (irq 11), address 00:26:9e:b2:07:4f
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 23 (irq
10)
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 19 (irq
10)
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 18 (irq
10)
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 23 (irq
10)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb6 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci7 at ppb6 bus 9
pcib0 at pci0 dev 31 function 0 "Intel 82801IBM LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: apic 2 int 19
(irq 10), AHCI 1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, INTEL SSDSA2M080, 2CV1> SCSI3 0/direct fixed
sd0: 76319MB, 512 bytes/sec, 156301488 sec total
cd0 at scsibus0 targ 1 lun 0: <HL-DT-ST, DVDRAM GSA-T50N, RS06> ATAPI 5/cdrom
removable
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 2 int 19
(irq 10)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-8500 SO-DIMM
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
uvideo0 at uhub1 port 6 configuration 1 interface 0 "Chicony Electronics Co.,
Ltd. Integrated Camera" rev 2.00/82.54 addr 2
video0 at uvideo0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
-------------
--- Xorg.0.log ---
(--) checkDevMem: using aperture driver /dev/xf86
(--) Using wscons driver on /dev/ttyC4 in pcvt compatibility mode (version 3.32)
X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: OpenBSD 4.7 amd64
Current Operating System: OpenBSD polymnia.sshunet.nl 4.7
GENERIC.MP_WITH_INTELDRM_GEM#0 amd64
Build Date: 21 April 2010 05:10:06PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 21 22:33:41 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No device specified for screen "Default Screen Section".
Using the first device section listed.
(**) | |-->Device "Intel GM45 video driver"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Not automatically adding devices
(==) Not automatically enabling devices
(WW) The directory "/usr/X11R6/lib/X11/fonts/local/" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,
/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,
/usr/local/share/ghostscript/fonts/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/75dpi/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/local/lib/X11/fonts/terminus/,
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
(==) ModulePath set to "/usr/X11R6/lib/modules"
(==) |-->Input Device "<default pointer>"
(==) |-->Input Device "<default keyboard>"
(==) No Layout section. Using the default mouse configuration.
(==) No Layout section. Using the default keyboard configuration.
(II) Loader magic: 0x1b40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on openbsd
(--) PCI:*(0:0:2:0) 8086:2a42:17aa:213a Intel GM45 Video rev 7, Mem @
0xf2400000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
(--) PCI: (0:0:2:1) 8086:2a43:17aa:213a Intel GM45 Video rev 7, Mem @
0xf2100000/1048576
(II) System resource ranges:
[0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/X11R6/lib/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/X11R6/lib/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 2.9.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) Primary Device is: PCI 0...@00:02:0
(II) resource ranges after probing:
[0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
drmOpenDevice: node name is /dev/drm0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/drm0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
(--) intel(0): Chipset: "GM45"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xF2400000 size 4194304
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(II) intel(0): No SDVO device is found in VBT
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA has no monitor section
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at
address 0x60.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "LEN", prod id 16560
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered
at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): Output HDMI-1 has no monitor section
(II) intel(0): I2C bus "HDMIDDC_B" initialized.
(II) intel(0): HDMI output 1 detected
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered
at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
(II) intel(0): EDID vendor "LEN", prod id 16560
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output HDMI-1 disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1366x768
(==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
(II) intel(0): detected 512 kB GTT.
(II) intel(0): detected 131068 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) intel(0): Kernel reported 491520 total, 0 used
(II) intel(0): I830CheckAvailableMemory: 1966080 kB available
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(II) put_image
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): Disable render standby.
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00075fff: compressed frame buffer (472 kB,
0x0000000078000000 physical
)
(II) intel(0): 0x00076000-0x00076fff: power context (4 kB)
(II) intel(0): 0x07fff000: end of stolen memory
(II) intel(0): 0x07fff000-0x0f9fefff: DRI memory manager (124928 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x07fff000: start of memory manager
(II) intel(0): 0x08020000-0x0843ffff: front buffer (4224 kB) X tiled
(II) intel(0): 0x08820000-0x08829fff: HW cursors (40 kB)
(II) intel(0): 0x0f9ff000: end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output HDMI-1 is connected to pipe none
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/X11R6/lib/modules/dri/i965_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 345 x 194
(WW) <default pointer>: No Device specified, looking for one...
(II) <default pointer>: found Device "/dev/wsmouse"
(**) <default pointer>: Protocol: WSMouse
(**) Option "CorePointer"
(**) <default pointer>: always reports core events
(**) Option "Device" "/dev/wsmouse"
(==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
(**) <default pointer>: ZAxisMapping: buttons 4 and 5
(**) <default pointer>: Buttons: 9
(II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
(**) <default pointer>: (accel) keeping acceleration scheme 1
(**) <default pointer>: (accel) filter chain progression: 2.00
(**) <default pointer>: (accel) filter stage 0: 20.00 ms
(**) <default pointer>: (accel) set acceleration profile 0
(**) Option "CoreKeyboard"
(**) <default keyboard>: always reports core events
(**) Option "Protocol" "standard"
(**) <default keyboard>: Protocol: standard
(--) <default keyboard>: using wscons layout us
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) <default keyboard>: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) <default keyboard>: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) <default keyboard>: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) <default keyboard>: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "<default keyboard>" (type: KEYBOARD)
(II) 3rd Button detected: disabling emulate3Button
------------------
--- dmesg: diff ---
--- /var/run/dmesg.boot Thu Apr 22 08:46:32 2010
+++ dmesg.boot Thu Apr 22 08:41:53 2010
@@ -9,12 +9,12 @@
acpi at bios0 not configured
mpbios0 at bios0: Intel MP Specification 1.4
cpu0 at mainbus0: apid 0 (boot processor)
-cpu0: Intel(R) Core(TM)2 Duo CPU T6570 @ 2.10GHz, 2095.11 MHz
+cpu0: Intel(R) Core(TM)2 Duo CPU T6570 @ 2.10GHz, 2095.10 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
-cpu1: Intel(R) Core(TM)2 Duo CPU T6570 @ 2.10GHz, 2094.76 MHz
+cpu1: Intel(R) Core(TM)2 Duo CPU T6570 @ 2.10GHz, 2094.75 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG
cpu1: 2MB 64b/line 8-way L2 cache
mpbios0: bus 0 is type PCI
-------------------
--- Xorg.0.log: diff ---
--- /var/log/Xorg.0.log Thu Apr 22 08:48:37 2010
+++ Xorg.0.log Thu Apr 22 08:42:18 2010
@@ -6,14 +6,14 @@
X Protocol Version 11, Revision 0
Build Operating System: OpenBSD 4.7 amd64
Current Operating System: OpenBSD polymnia.sshunet.nl 4.7
GENERIC.MP_WITH_INTELDRM_GEM#0 amd64
-Build Date: 25 March 2010 06:06:56PM
+Build Date: 21 April 2010 05:10:06PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
-(==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 22 08:48:07 2010
+(==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 21 22:33:41 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
@@ -105,7 +105,7 @@
(II) LoadModule: "intel"
(II) Loading /usr/X11R6/lib/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
- compiled for 1.6.5, module version = 2.7.1
+ compiled for 1.6.5, module version = 2.9.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "mouse"
@@ -122,28 +122,16 @@
ABI class: X.Org XInput driver, version 4.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
- E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
- 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
- Mobile Intel. GM45 Express Chipset,
- Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
+ E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
+ 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
+ 4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) Primary Device is: PCI 0...@00:02:0
-(II) resource ranges after xf86ClaimFixedResources() call:
+(II) resource ranges after probing:
[0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
-(II) resource ranges after probing:
- [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
- [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
- [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
- [3] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
- [4] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
- [5] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
- [6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
- [7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
- [8] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
- [9] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules//libvgahw.so
@@ -153,17 +141,24 @@
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
+drmOpenDevice: node name is /dev/drm0
+drmOpenDevice: open result is 10, (OK)
+drmOpenByBusid: Searching for BusID pci:0000:00:02.0
+drmOpenDevice: node name is /dev/drm0
+drmOpenDevice: open result is 10, (OK)
+drmOpenByBusid: drmOpenMinor returns 10
+drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
-(II) intel(0): Integrated Graphics Chipset: Intel(R) Mobile Intel. GM45
Express Chipset
-(--) intel(0): Chipset: "Mobile Intel. GM45 Express Chipset"
+(II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
+(--) intel(0): Chipset: "GM45"
(--) intel(0): Linear framebuffer at 0xD0000000
-(--) intel(0): IO registers at addr 0xF2400000
+(--) intel(0): IO registers at addr 0xF2400000 size 4194304
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
-(==) intel(0): Using EXA for acceleration
+(II) intel(0): No SDVO device is found in VBT
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
@@ -192,7 +187,6 @@
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
-(II) intel(0): Resizable framebuffer: not available (1 3)
(II) intel(0): EDID vendor "LEN", prod id 16560
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
@@ -211,93 +205,48 @@
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
-(II) Loading sub module "exa"
-(II) LoadModule: "exa"
-(II) Loading /usr/X11R6/lib/modules//libexa.so
-(II) Module exa: vendor="X.Org Foundation"
- compiled for 1.6.5, module version = 2.4.0
- ABI class: X.Org Video Driver, version 5.0
-(II) intel(0): Comparing regs from server start up to After PreInit
-(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to
0xd000000a
-(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
-(WW) intel(0): PP_STATUS after: on, ready, sequencing on
-(WW) intel(0): Register 0x61110 (PORT_HOTPLUG_EN) changed from 0x00000120 to
0x38000120
-(WW) intel(0): Register 0x61114 (PORT_HOTPLUG_STAT) changed from 0x00000000 to
0x18000000
-(WW) intel(0): Register 0x321b (FBC_FENCE_OFF) changed from 0xb102b100 to
0xf3014600
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
- [3] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
- [4] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
- [5] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
- [6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
- [7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
- [8] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
- [9] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
+ [3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
+ [4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) intel(0): Kernel reported 491520 total, 0 used
(II) intel(0): I830CheckAvailableMemory: 1966080 kB available
-(WW) intel(0): DRI2 requires UXA
-drmOpenDevice: node name is /dev/drm0
-drmOpenDevice: open result is 11, (OK)
-drmOpenDevice: node name is /dev/drm0
-drmOpenDevice: open result is 11, (OK)
-drmOpenByBusid: Searching for BusID pci:0000:00:02.0
-drmOpenDevice: node name is /dev/drm0
-drmOpenDevice: open result is 11, (OK)
-drmOpenByBusid: drmOpenMinor returns 11
-drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
-(II) [drm] DRM interface version 1.2
-(II) [drm] DRM open master succeeded.
-(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
-(II) intel(0): [drm] framebuffer mapped by ddx driver
-(II) intel(0): [drm] added 1 reserved context for kernel
-(II) intel(0): X context handle = 0x1
-(II) intel(0): [drm] installed DRM signal handler
+(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
+(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
-(II) intel(0): [drm] Registers = 0x40002000
-(II) intel(0): [dri] visual configs initialized
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
-(II) EXA(0): Offscreen pixmap area of 23080960 bytes
-(II) EXA(0): Driver registered support for the following operations:
-(II) Solid
-(II) Copy
-(II) Composite (RENDER acceleration)
+(II) UXA(0): Driver registered support for the following operations:
+(II) solid
+(II) copy
+(II) composite (RENDER acceleration)
+(II) put_image
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
-(II) intel(0): [DRI] installation complete
(II) intel(0): Disable render standby.
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00075fff: compressed frame buffer (472 kB,
0x0000000078000000 physical
)
-(II) intel(0): 0x00076000-0x01678fff: exa offscreen (22540 kB)
-(II) intel(0): 0x01679000-0x01679fff: power context (4 kB)
+(II) intel(0): 0x00076000-0x00076fff: power context (4 kB)
(II) intel(0): 0x07fff000: end of stolen memory
-(II) intel(0): 0x07fff000-0x0e3fbfff: DRI memory manager (102388 kB)
+(II) intel(0): 0x07fff000-0x0f9fefff: DRI memory manager (124928 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x07fff000: start of memory manager
-(II) intel(0): 0x08020000-0x08783fff: depth buffer (7568 kB) Y tiled
-(II) intel(0): 0x08820000-0x08f83fff: back buffer (7568 kB) X tiled
-(II) intel(0): 0x09020000-0x09776fff: front buffer (7516 kB) X tiled
-(II) intel(0): 0x09820000-0x09829fff: HW cursors (40 kB)
-(II) intel(0): 0x0e3fc000: end of memory manager
-(WW) intel(0): ESR is 0x00000010, page table error
-(WW) intel(0): PGTBL_ER is 0x00100000, CS instruction GTT PTE
-(WW) intel(0): Existing errors found in hardware state.
+(II) intel(0): 0x08020000-0x0843ffff: front buffer (4224 kB) X tiled
+(II) intel(0): 0x08820000-0x08829fff: HW cursors (40 kB)
+(II) intel(0): 0x0f9ff000: end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
-(II) intel(0): [drm] mapped front buffer at 0xd9020000, handle = 0x40082000
-(II) intel(0): [drm] mapped back buffer at 0xd8820000, handle = 0x407d9000
-(II) intel(0): [drm] mapped depth buffer at 0xd8020000, handle = 0x40f3d000
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
@@ -310,7 +259,7 @@
(II) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
-(II) intel(0): direct rendering: XF86DRI Enabled
+(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
@@ -327,24 +276,12 @@
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
-(II) AIGLX: Screen 0 is not DRI2 capable
-drmOpenDevice: node name is /dev/drm0
-drmOpenDevice: open result is 12, (OK)
-drmOpenByBusid: Searching for BusID pci:0000:00:02.0
-drmOpenDevice: node name is /dev/drm0
-drmOpenDevice: open result is 12, (OK)
-drmOpenByBusid: drmOpenMinor returns 12
-drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
-(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
-(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
+(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/X11R6/lib/modules/dri/i965_dri.so
-(II) GLX: Initialized DRI GL provider for screen 0
+(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 345 x 194
-(EE) Error compiling keymap (server-0)
-(EE) XKB: Couldn't compile keymap
-(WW) Couldn't load XKB keymap, falling back to pre-XKB keymap
(WW) <default pointer>: No Device specified, looking for one...
(II) <default pointer>: found Device "/dev/wsmouse"
(**) <default pointer>: Protocol: WSMouse
@@ -374,6 +311,4 @@
(**) Option "CustomKeycodes" "off"
(**) <default keyboard>: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "<default keyboard>" (type: KEYBOARD)
-(EE) Error compiling keymap (server-0)
-(EE) XKB: Couldn't compile keymap
-(WW) Couldn't load XKB keymap, falling back to pre-XKB keymap
+(II) 3rd Button detected: disabling emulate3Button
