Sounds good. To note...in 2.3...our furthest tower is 110KM from an AT&T site...and we are affected heavily during ducting periods. It is real...and it sucks...hopefully we will have a good news story once we are done with AT&T.
Cheers, ______________________________ Andreas Wiatowski | CEO Silo Wireless Inc. Email andr...@silowireless.com 19 Sage Court Brantford, Ontario N3R 7T4 (CANADA) Tel +1.519.449.5656 Extension-600|Fax +1.519.449.5536 |Toll Free +1.866.727.4138 -----Original Message----- From: telrad-boun...@wispa.org [mailto:telrad-boun...@wispa.org] On Behalf Of Paul Vaughn Sent: Monday, September 19, 2016 1:12 PM To: telrad@wispa.org Subject: Re: [Telrad] Down tilt Appreciate the feedback on the down tilt. I think we are currently at 3 degrees with this one. The truck just pulled out to go play with this a little. I was excited by the upgrade over the weekend. I also upgraded a handful of clients hoping to see great improvements but I actually got a text this morning saying it was worse! The client went from having around 1 meg upload to .04 when he finally got the test to load. I don't see how we can have any interference on this 2.5 license. We are the only licenses around here for miles and this is our only deployment so far. We will see how this helps. Thanks again for the feedback. Paul R. Vaughn Tennessee Wireless (931) 996-2050 -----Original Message----- From: telrad-boun...@wispa.org [mailto:telrad-boun...@wispa.org] On Behalf Of telrad-requ...@wispa.org Sent: Sunday, September 18, 2016 11:00 AM To: telrad@wispa.org Subject: Telrad Digest, Vol 23, Issue 20 Send Telrad mailing list submissions to telrad@wispa.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.wispa.org/mailman/listinfo/telrad or, via email, send a message with subject or body 'help' to telrad-requ...@wispa.org You can reach the person managing the list at telrad-ow...@wispa.org When replying, please edit your Subject line so it is more specific than "Re: Contents of Telrad digest..." Today's Topics: 1. Re: Down tilt (Andreas Wiatowski) ---------------------------------------------------------------------- Message: 1 Date: Sun, 18 Sep 2016 13:48:32 +0000 From: Andreas Wiatowski <andr...@silowireless.com> Subject: Re: [Telrad] Down tilt To: "telrad@wispa.org" <telrad@wispa.org> Message-ID: <anm8xs5upyjn9i0cx4th06om.1474206508...@email.android.com> Content-Type: text/plain; charset="windows-1252" I would literally go to the furthest point you wish to cover with a UR or take your most distant subscriber and tilt in a live environment. The LTE gear carries far, and I think many of us are causing self interference. If your HAAT (height above average terrain) is much lower that your site (say you have a tower on a hill or mountian) then you need to take this into account as well. The more tilt you can use, the less interference your going to hear... The better you are going to perform. We anticipate having to tilt upto 10deg at some sites. Cheers, ______________________________ Andreas Wiatowski | CEO Silo Wireless Inc. Email andr...@silowireless.com<mailto:andr...@silowireless.com> 19 Sage Court Brantford, Ontario N3R 7T4 (CANADA) Tel +1.519.449.5656<tel:+1.519.449.5656> Extension-600|Fax +1.519.449.5536<tel:+1.519.449.5536> |Toll Free +1.866.727.4138<tel:+1.866.727.4138> -------- Original message -------- From: Ian Fraser <ian_fra...@gozoom.ca> Date: 2016-09-18 9:35 AM (GMT-05:00) To: telrad@wispa.org Subject: [Telrad] Down tilt I have not needed to be particularly careful with my TDMA gear so I have previously used Radio Molbile to give me an idea of tilt, but LTE is still causing me grief in 3.65 and I need more aggressive tilt if I'm going to make this kit work. Can someone validate the equation: https://www.pasternack.com/t-calculator-antenna-downtilt.aspx [cid:part1.BC42C53D.504D3C68@gozoom.ca] H=height t=transmitter r=receiver dt=downtilt bw=antenna beamwidth (vertical) Distance=distance from t to r on a horizontal plain at center of the beam Rad/inner/outer = inner and outer edge of the beam (assume -3dB) Assuming level ground and given : t=220 meters r=10 meters dt=5 bw=7 = Receiver Distance: 2400 m Inner Coverage Radius: 1405 m Outer Coverage Radius: 8020 m Cheers, Ian On 17/09/2016 10:24 PM, Andreas Wiatowski wrote: Paul, We are using the 3000 in band 40 in a 10Mhz channel with filters because it is the WCS band adjacent to Sirius XM. We see about 34Mbps x 3-6Mbps UL. If you are in an area with anyone within 50Miles of your band, you really want to know what they are running and make sure that you are timed via SA and SFF. I would recommend serious down tilt. We have gone to 5-7deg with tremendous performance increases on the uplink. We were at 3-4deg and had a hard time getting 4Mbps on uplink, since changing a few sites to more aggressive tilt...we have seen a serious improvement in uplink. 2Ghz...carries far!. We are running SA1 SSF1. Please keep in mind we have only 2 10Mhz channels and are running 4 sectros back to back with approximately 10KM between tower sites... so more small cell than Macro. I just finished picking up another Anritsu BTS Master with FDD LTE options and I'm going to add the TDD LTE options to it. It will give me OTA (Over the air) demodulation showing RB usage, EVM (error vector magnitude) measurements, constellation diagrams and a read of all OTA PCI ID's from a tower and adjacent with dominance statistics. I can get my hands on another 1 or 2 instruments for around 4K. I'm not sure how much adding the TDD options will be, but I know it will be well worth it. We also purchased a Sunsight AAT for Azimuth and tilt. We are working on a deadly accurate RNP moving forward. Already on 2 of the towers, the azimuths were out by a 10-15 deg magnitude and tilt was not 100%. We are hoping with these tweaks we will be able to take our LTE network to the next level of quality. Cheers, ______________________________ Andreas Wiatowski | CEO Silo Wireless Inc. Email andr...@silowireless.com<mailto:andr...@silowireless.com> 19 Sage Court Brantford, Ontario N3R 7T4 (CANADA) Tel +1.519.449.5656 Extension-600|Fax +1.519.449.5536 |Toll Free +1.866.727.4138 -----Original Message----- From: telrad-boun...@wispa.org<mailto:telrad-boun...@wispa.org> [mailto:telrad-boun...@wispa.org] On Behalf Of Paul Vaughn Sent: Saturday, September 17, 2016 2:33 PM To: telrad@wispa.org<mailto:telrad@wispa.org> Subject: [Telrad] Compact 3000 4X4 Patch Anyone have a status on the following? "Note 4x4 on the Compact 3000 is not supported in this build but coming within a few weeks. So only the Compact 1000 for now, Thanks Nick" - This was 7/29/2016. I finally stayed up through the night to get everything updated to the 6.6 only to find out by reading the fine print afterwards that 4X4 was not supported yet. Long frustrating night. And no help for the clients who are suffering poor uploads. We are running the 3000 on 15 mhz band 41. Has anyone found upload to be an issue? It seems like I don't have any clients running more that a few hundred k upload. Occasionaly I find one that will pull 2 megs. I'd be interested to know what others are doing and if there is something we can do differently. If I recall when we set this up we set it at 75/25 for the split. I'm looking up info now on playing with that setting a little. But honestly with only 15 mhz to play with we don't have a lot of download to give up. Anyone else running this way, or have thoughts or comments on the setup? Thanks - Paul Paul R. Vaughn Tennessee Wireless (931) 996-2050 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.wispa.org/mailman/private/telrad/attachments/20160918/47be40d1/attachment-0001.html -------------- next part -------------- A non-text attachment was scrubbed... Name: mniopmioccmpcicc.png Type: image/png Size: 3051 bytes Desc: mniopmioccmpcicc.png Url : http://lists.wispa.org/mailman/private/telrad/attachments/20160918/47be40d1/attachment-0002.png -------------- next part -------------- A non-text attachment was scrubbed... Name: mniopmioccmpcicc.png Type: image/png Size: 3051 bytes Desc: mniopmioccmpcicc.png Url : http://lists.wispa.org/mailman/private/telrad/attachments/20160918/47be40d1/attachment-0003.png ------------------------------ _______________________________________________ Telrad mailing list Telrad@wispa.org http://lists.wispa.org/mailman/listinfo/telrad End of Telrad Digest, Vol 23, Issue 20 ************************************** _______________________________________________ Telrad mailing list Telrad@wispa.org http://lists.wispa.org/mailman/listinfo/telrad _______________________________________________ Telrad mailing list Telrad@wispa.org http://lists.wispa.org/mailman/listinfo/telrad