Thanks Terry
I am running F1F2. So leave the eNB at 6.6 and move the UE's to .89 ?
Thanks,
Ian
On 20/09/2016 11:30 AM, Adam Brodel wrote:
Why back to .89? Are there problems with .105?
*From:*[email protected] [mailto:[email protected]] *On
Behalf Of *Terry Duchcherer
*Sent:* Tuesday, September 20, 2016 6:40 AM
*To:* [email protected]
*Subject:* Re: [Telrad] Down tilt
Ian, if you are running version 105 on the UE’s, try downgrading to
.89. Also, with the sectors not back to back using F1F2 would be better.
Terry
*From:*[email protected] <mailto:[email protected]>
[mailto:[email protected]] *On Behalf Of *Ian Fraser
*Sent:* Monday, September 19, 2016 8:00 PM
*To:* Jeremy Austin <[email protected] <mailto:[email protected]>>;
[email protected] <mailto:[email protected]>
*Subject:* Re: [Telrad] Down tilt
There are only 12 UE on that eNB. Average plan is 1x5. CINRS are all
pretty good. I can lock them to the sector freq based on geographical
location but thats a pain if I need to change channels.
Cheers
Ian
-------- Original message --------
From: Jeremy Austin <[email protected] <mailto:[email protected]>>
Date:09-19-2016 7:59 PM (GMT-05:00)
To: [email protected] <mailto:[email protected]>
Cc:
Subject: Re: [Telrad] Down tilt
On Mon, Sep 19, 2016 at 2:17 PM, Ian Fraser <[email protected]
<mailto:[email protected]>> wrote:
Now I see in BV that UpLink utilization is higher than it has ever
been
at 91% (peak was ~75% previously) vs. DL at 58%. I expect UL to
drop
or at least stay the same since we mitigated the noise slightly.
I stopped frequency locking the UE's - could the UL utilization be
caused by UE's that are on the 'wrong' sector ?
How many UEs are on your ENB that's seeing high up utilization?
We're currently wrangling with high upload (96% and more) usage on at
least one sector in the low 20s. CINR are fairly high across the
board. Seems to be new since 6.6, and doesn't seem to make much
difference whether we're in 2x4 or 4x4 mode.
We've been comparing the output of "show ue-info active-ue-info-list
bearer-information"
to identify UEs on the wrong sector. However, we're not using split
mode, so I doubt that would be helpful for you — from what I recall,
split mode just splits the RF chains, not the overall LTE capacity, so
a client has no way to identify which sector it's on.
--
Jeremy Austin
(907) 895-2311 <tel:%28907%29%20895-2311>
(907) 803-5422 <tel:%28907%29%20803-5422>
[email protected] <mailto:[email protected]>
Heritage NetWorks
Whitestone Power & Communications
Vertical Broadband, LLC
Schedule a meeting: http://doodle.com/jermudgeon
_______________________________________________
Telrad mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/telrad
_______________________________________________
Telrad mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/telrad
