You might want to add multiple entries per PCI so you have flexibility to change frequencies in the future without needing to touch your UEs.
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Dan Petermann Sent: Wednesday, December 7, 2016 3:47 PM To: [email protected] Subject: Re: [Telrad] Lock to specific sector Thank you! On Dec 7, 2016, at 12:08 PM, Gabriel Pike <[email protected]> wrote: > On a 7000 from the main page click Mobile > Network->Technology->LTE->Cell Lock Once there you will need to know > your sectors Earfcn which is LTE lingo for channel. Google it to find > a chart to show you what your frequency will be. > Click add+ then enter the Earfcn and PCI and apply. > > > For the 8000 from the main page click eNB settings you should see the > available sectors under Sorted eNB List. Make sure Prefered eNB list > is checked. Then add the sector you want to the preferred list and click apply. > You can also lock this to frequency by checking the Lock ND&S to the > preferred list checkbox, but I don't do this because It will attach to > the preferred eNB first from what I have seen. > > Regards, > > Gabriel Pike > Network Engineering > MTCNA > DMCI Broadband, LLC > [email protected] > > 877.936.2422 > Ext. 103 > > > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On > Behalf Of Dan Petermann > Sent: Wednesday, December 07, 2016 1:57 PM > To: [email protected] > Subject: Re: [Telrad] Lock to specific sector > > 7000, but I'd appreciate knowing both procedures > > > > On Dec 7, 2016, at 11:29 AM, Gabriel Pike <[email protected]> wrote: > >> Is it a 7000 or an 8000? It is a different procedure on each. >> >> Regards, >> >> Gabriel Pike >> Network Engineering >> MTCNA >> DMCI Broadband, LLC >> [email protected] >> >> 877.936.2422 >> Ext. 103 >> >> >> -----Original Message----- >> From: [email protected] [mailto:[email protected]] On >> Behalf Of Dan Petermann >> Sent: Wednesday, December 07, 2016 1:19 PM >> To: [email protected] >> Subject: [Telrad] Lock to specific sector >> >> Does anyone know the procedure to lock a UE to a specific eNB? >> >> We have a few that are at the sector edge and want them to stay on a >> specific one. >> _______________________________________________ >> Telrad mailing list >> [email protected] >> http://lists.wispa.org/mailman/listinfo/telrad >> >> _______________________________________________ >> Telrad mailing list >> [email protected] >> http://lists.wispa.org/mailman/listinfo/telrad > > _______________________________________________ > Telrad mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/telrad > > _______________________________________________ > Telrad mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/telrad _______________________________________________ Telrad mailing list [email protected] http://lists.wispa.org/mailman/listinfo/telrad _______________________________________________ Telrad mailing list [email protected] http://lists.wispa.org/mailman/listinfo/telrad
