A recurring annoyance I had with Wimax was CPE wandering to another BSID. The preferred BSID would apply when they scanned for a BS, but if for some reason they went to some other BSID they would be stuck on the wrong BS until a rescan was forced (probably by rebooting).
Does LTE do this too? ------ Original Message ------ From: "Gabriel Pike" <[email protected]> To: [email protected] Sent: 12/7/2016 2:08:35 PM Subject: Re: [Telrad] Lock to specific sector >On a 7000 from the main page click Mobile >Network->Technology->LTE->Cell >Lock >Once there you will need to know your sectors Earfcn which is LTE lingo >for >channel. Google it to find a chart to show you what your frequency will >be. >Click add+ then enter the Earfcn and PCI and apply. > > >For the 8000 from the main page click eNB settings you should see the >available sectors under Sorted eNB List. Make sure Prefered eNB list is >checked. Then add the sector you want to the preferred list and click >apply. >You can also lock this to frequency by checking the Lock ND&S to the >preferred list checkbox, but I don't do this because It will attach to >the >preferred eNB first from what I have seen. > >Regards, > >Gabriel Pike >Network Engineering >MTCNA >DMCI Broadband, LLC >[email protected] > >877.936.2422 >Ext. 103 > > > >-----Original Message----- >From: [email protected] [mailto:[email protected]] On >Behalf >Of Dan Petermann >Sent: Wednesday, December 07, 2016 1:57 PM >To: [email protected] >Subject: Re: [Telrad] Lock to specific sector > >7000, but I'd appreciate knowing both procedures > > > >On Dec 7, 2016, at 11:29 AM, Gabriel Pike <[email protected]> >wrote: > >> Is it a 7000 or an 8000? It is a different procedure on each. >> >> Regards, >> >> Gabriel Pike >> Network Engineering >> MTCNA >> DMCI Broadband, LLC >> [email protected] >> >> 877.936.2422 >> Ext. 103 >> >> >> -----Original Message----- >> From: [email protected] [mailto:[email protected]] On >> Behalf Of Dan Petermann >> Sent: Wednesday, December 07, 2016 1:19 PM >> To: [email protected] >> Subject: [Telrad] Lock to specific sector >> >> Does anyone know the procedure to lock a UE to a specific eNB? >> >> We have a few that are at the sector edge and want them to stay on a >> specific one. >> _______________________________________________ >> Telrad mailing list >> [email protected] >> http://lists.wispa.org/mailman/listinfo/telrad >> >> _______________________________________________ >> Telrad mailing list >> [email protected] >> http://lists.wispa.org/mailman/listinfo/telrad > >_______________________________________________ >Telrad mailing list >[email protected] >http://lists.wispa.org/mailman/listinfo/telrad > >_______________________________________________ >Telrad mailing list >[email protected] >http://lists.wispa.org/mailman/listinfo/telrad > _______________________________________________ Telrad mailing list [email protected] http://lists.wispa.org/mailman/listinfo/telrad
