The EPC and most of the eNB are running the latest general release
available on Zendesk.
A couple of eNB are running some kind of maintenance release that
support wanted us to try.
I'm making sure to run iPerf on the dedicated bearer to eliminate other
user traffic from weaker UE as a factor. At QCI 1 it should take
precedence over the default bearer traffic.
I would definitely take the time to set one up, not necessarily for this
purpose, but rather to ensure you always have access to your UE. If the
default bearer is hosed with a torrent and you don't have a dedicated
bearer for management access then you can be completely locked out of
the unit. Monitoring, management access, and firmware updates all work
more reliably with the dedicated bearer and I'd strongly recommend it.
There's a knowledge base article in Zendesk about it. Use DSCP 6
because that's tagged by default in the UE.
------ Original Message ------
From: "Jeremy Austin" <jhaus...@gmail.com>
To: "Adam Moffett" <ad...@clarityconnect.com>; telrad@wispa.org
Sent: 2/6/2017 4:30:43 PM
Subject: Re: [Telrad] Uplink throughput again
On Mon, Feb 6, 2017 at 12:20 PM, Adam Moffett
<ad...@clarityconnect.com> wrote:
Can somebody tell me if they're getting expected uplink throughput?
What ENB and EPC revisions are you at, Adam?
We're investigating this same issue ourselves, although we haven't
tried a dedicated bearer.
--
Jeremy Austin
(907) 895-2311
(907) 803-5422
jhaus...@gmail.com
Heritage NetWorks
Whitestone Power & Communications
Vertical Broadband, LLC
Schedule a meeting: http://doodle.com/jermudgeon
_______________________________________________
Telrad mailing list
Telrad@wispa.org
http://lists.wispa.org/mailman/listinfo/telrad