Hello all,
thank you for your answers. Projection none doesn't work - all survey
lines will appear on the pdf but not the scanned map. So I tried
projection plan again and marked a second station and this did the
trick. The background is now on the output as I expected. One problem I
need to solve: The stations aren't marked on the map so I've to guess
where they are... My estimation shouldn't be too far off to prevent
unwanted distortions of the map.
Thanks again for your support!
Roger
------ Originalnachricht ------
Von: "Martin Sluka via Therion" <[email protected]>
An: "List for Therion users" <[email protected]>
Cc: "Martin Sluka" <[email protected]>
Gesendet: 13.04.2020 12:28:40
Betreff: Re: [Therion] Sketches on doesn't work / legacy survey
13. 4. 2020 v 11:20, Roger Schuster <[email protected]>:
After that I created a scrap with the scanned map (projection plan)
and scaled it using the scale bar and the scaling tool of Xtherion map
editor.
I’m afraid it will work only for "projection none" as for sections.
For plan you should use minimally two stations because Therion
georeferences each scrap according those stations.
Martin
_______________________________________________
Therion mailing list
[email protected]
https://mailman.speleo.sk/listinfo/therion
