Hello again,
finally I got it working and if I compare the output of Therion with the
original map on paper there is only a tiny bit of distortion. Both maps
match quite nicely. There are just two things I don't understand:
There is a white, trapezoid gap on the map which isn't on the background
image (of course). I guess it has something to do with the morphing - is
there a way to get rid of this artifact?
I also noticed that length and depth statistics in the map header
(registers \cavelength and \cavedepth) are wrong while in the log file
it's right. The values in the registers obviously depend on which
stations / surveys are marked and to get the same values as in the log
at least one station of each survey has to be marked (unfortunately each
mark results in a more or less ugly white trapezoid as mentioned above).
This is the reason why I decided to override the registers in code
tex-map.
Unfortunately I can't post the map here because of copyright reasons.
Best regards,
Roger
------ Originalnachricht ------
Von: "עמרי גסטר" <omri...@gmail.com>
An: "List for Therion users" <therion@speleo.sk>
Gesendet: 13.04.2020 14:06:17
Betreff: Re: [Therion] Sketches on doesn't work / legacy survey
You can use the debug function to see how bad is the distortion and
change the position of the station accordingly until you are happy with
the result.
On Mon, Apr 13, 2020, 2:52 PM Roger Schuster <ro...@r-schuster.de>
wrote:
Hello all,
thank you for your answers. Projection none doesn't work - all survey
lines will appear on the pdf but not the scanned map. So I tried
projection plan again and marked a second station and this did the
trick. The background is now on the output as I expected. One problem
I need to solve: The stations aren't marked on the map so I've to
guess where they are... My estimation shouldn't be too far off to
prevent unwanted distortions of the map.
Thanks again for your support!
Roger
------ Originalnachricht ------
Von: "Martin Sluka via Therion" <therion@speleo.sk>
An: "List for Therion users" <therion@speleo.sk>
Cc: "Martin Sluka" <martinsl...@mac.com>
Gesendet: 13.04.2020 12:28:40
Betreff: Re: [Therion] Sketches on doesn't work / legacy survey
13. 4. 2020 v 11:20, Roger Schuster <ro...@r-schuster.de>:
After that I created a scrap with the scanned map (projection plan)
and scaled it using the scale bar and the scaling tool of Xtherion
map editor.
I’m afraid it will work only for "projection none" as for sections.
For plan you should use minimally two stations because Therion
georeferences each scrap according those stations.
Martin
_______________________________________________
Therion mailing list
Therion@speleo.sk
https://mailman.speleo.sk/listinfo/therion
_______________________________________________
Therion mailing list
Therion@speleo.sk
https://mailman.speleo.sk/listinfo/therion