Oups, sorry, I have answer without searching in my thconfigs... The right command is
symbol-hide line survey Cheers Xavier De: "Roger Schuster" <[email protected]> À: "List for Therion users" <[email protected]> Envoyé: Mardi 14 Avril 2020 14:36:31 Objet: Re: [Therion] Sketches on doesn't work / legacy survey Hi, this results in the following error: symbol-hide line centerline: error -- thconfig [12] -- thconfig [12] -- unknown symbol specification -- line centerline Roger ------ Originalnachricht ------ Von: "Xavier Robert" < [ mailto:[email protected] | [email protected] ] > An: "List for Therion users" < [ mailto:[email protected] | [email protected] ] > Gesendet: 14.04.2020 20:45:38 Betreff: Re: [Therion] Sketches on doesn't work / legacy survey Hi, I may be wrong, but it looks like if you plot the centerline ? In your thconfig, if you add "symbol-hide line centerline", does it solve your problem ? Cheers, Xavier De: "Roger Schuster" < [ mailto:[email protected] | [email protected] ] > À: "List for Therion users" < [ mailto:[email protected] | [email protected] ] > Envoyé: Mardi 14 Avril 2020 13:31:25 Objet: Re: [Therion] Sketches on doesn't work / legacy survey Hi cavers, symbol-hide doesn't change anything. Here is a screen shot of the white, trapezoid "artifact": As said I marked two stations (-visibility off) at opposite ends of the cave on the map getting this white "things". When I use color map-fg the trapezoid is filled in the given foreground color. I use Therion 5.4.4 btw. Regards, Roger ------ Originalnachricht ------ Von: "Torsten Schnitter via Therion" < [ mailto:[email protected] | [email protected] ] > An: "List for Therion users" < [ mailto:[email protected] | [email protected] ] > Cc: "Torsten Schnitter" < [ mailto:[email protected] | [email protected] ] > Gesendet: 14.04.2020 08:50:24 Betreff: Re: [Therion] Sketches on doesn't work / legacy survey BQ_BEGIN Hi Roger I'm not sure about your problem with the "artifacts" but try "symbol-hide point station" in your layout definition for the map. (maybe also "symbol-hide line survey") Just a guess... cheers, Torsten BQ_BEGIN Roger Schuster < [ mailto:[email protected] | [email protected] ] > hat am 13. April 2020 um 19:00 geschrieben: Hello again, finally I got it working and if I compare the output of Therion with the original map on paper there is only a tiny bit of distortion. Both maps match quite nicely. There are just two things I don't understand: There is a white, trapezoid gap on the map which isn't on the background image (of course). I guess it has something to do with the morphing - is there a way to get rid of this artifact? I also noticed that length and depth statistics in the map header (registers \cavelength and \cavedepth) are wrong while in the log file it's right. The values in the registers obviously depend on which stations / surveys are marked and to get the same values as in the log at least one station of each survey has to be marked (unfortunately each mark results in a more or less ugly white trapezoid as mentioned above). This is the reason why I decided to override the registers in code tex-map. Unfortunately I can't post the map here because of copyright reasons. Best regards, Roger ------ Originalnachricht ------ Von: "עמרי גסטר" < [ mailto:[email protected] | [email protected] ] > An: "List for Therion users" < [ mailto:[email protected] | [email protected] ] > Gesendet: 13.04.2020 14:06:17 Betreff: Re: [Therion] Sketches on doesn't work / legacy survey BQ_BEGIN You can use the debug function to see how bad is the distortion and change the position of the station accordingly until you are happy with the result. On Mon, Apr 13, 2020, 2:52 PM Roger Schuster < [ mailto:[email protected] | [email protected] ] > wrote: BQ_BEGIN Hello all, thank you for your answers. Projection none doesn't work - all survey lines will appear on the pdf but not the scanned map. So I tried projection plan again and marked a second station and this did the trick. The background is now on the output as I expected. One problem I need to solve: The stations aren't marked on the map so I've to guess where they are... My estimation shouldn't be too far off to prevent unwanted distortions of the map. Thanks again for your support! Roger ------ Originalnachricht ------ Von: "Martin Sluka via Therion" < [ mailto:[email protected] | [email protected] ] > An: "List for Therion users" < [ mailto:[email protected] | [email protected] ] > Cc: "Martin Sluka" < [ mailto:[email protected] | [email protected] ] > Gesendet: 13.04.2020 12:28:40 Betreff: Re: [Therion] Sketches on doesn't work / legacy survey BQ_BEGIN BQ_BEGIN 13. 4. 2020 v 11:20, Roger Schuster < [ mailto:[email protected] | [email protected] ] >: After that I created a scrap with the scanned map (projection plan) and scaled it using the scale bar and the scaling tool of Xtherion map editor. I’m afraid it will work only for "projection none" as for sections. For plan you should use minimally two stations because Therion georeferences each scrap according those stations. Martin BQ_END _______________________________________________ Therion mailing list [ mailto:[email protected] | [email protected] ] [ https://mailman.speleo.sk/listinfo/therion | https://mailman.speleo.sk/listinfo/therion ] BQ_END BQ_END BQ_END BQ_BEGIN _______________________________________________ Therion mailing list [ mailto:[email protected] | [email protected] ] [ https://mailman.speleo.sk/listinfo/therion | https://mailman.speleo.sk/listinfo/therion ] BQ_END BQ_END _______________________________________________ Therion mailing list [ mailto:[email protected] | [email protected] ] [ https://mailman.speleo.sk/listinfo/therion | https://mailman.speleo.sk/listinfo/therion ] BQ_END _______________________________________________ Therion mailing list [email protected] https://mailman.speleo.sk/listinfo/therion
_______________________________________________ Therion mailing list [email protected] https://mailman.speleo.sk/listinfo/therion
