Hi Roger I'm not sure about your problem with the "artifacts" but try "symbol-hide point station" in your layout definition for the map. (maybe also "symbol-hide line survey")
Just a guess... cheers, Torsten > Roger Schuster <[email protected]> hat am 13. April 2020 um 19:00 > geschrieben: > > Hello again, > > finally I got it working and if I compare the output of Therion with the > original map on paper there is only a tiny bit of distortion. Both maps match > quite nicely. There are just two things I don't understand: > > There is a white, trapezoid gap on the map which isn't on the background > image (of course). I guess it has something to do with the morphing - is > there a way to get rid of this artifact? > > I also noticed that length and depth statistics in the map header > (registers \cavelength and \cavedepth) are wrong while in the log file it's > right. The values in the registers obviously depend on which stations / > surveys are marked and to get the same values as in the log at least one > station of each survey has to be marked (unfortunately each mark results in a > more or less ugly white trapezoid as mentioned above). This is the reason why > I decided to override the registers in code tex-map. > > Unfortunately I can't post the map here because of copyright reasons. > > Best regards, > > Roger > > ------ Originalnachricht ------ > Von: "עמרי גסטר" < [email protected] mailto:[email protected] > > An: "List for Therion users" < [email protected] mailto:[email protected] > > > Gesendet: 13.04.2020 14:06:17 > Betreff: Re: [Therion] Sketches on doesn't work / legacy survey > > > > > You can use the debug function to see how bad is the > distortion and change the position of the station accordingly until you are > happy with the result. > > > > On Mon, Apr 13, 2020, 2:52 PM Roger Schuster < [email protected] > > mailto:[email protected] > wrote: > > > > > > > Hello all, > > > > > > thank you for your answers. Projection none doesn't work - > > > all survey lines will appear on the pdf but not the scanned map. So I > > > tried projection plan again and marked a second station and this did the > > > trick. The background is now on the output as I expected. One problem I > > > need to solve: The stations aren't marked on the map so I've to guess > > > where they are... My estimation shouldn't be too far off to prevent > > > unwanted distortions of the map. > > > > > > Thanks again for your support! > > > > > > Roger > > > > > > ------ Originalnachricht ------ > > > Von: "Martin Sluka via Therion" < [email protected] > > > mailto:[email protected] > > > > An: "List for Therion users" < [email protected] > > > mailto:[email protected] > > > > Cc: "Martin Sluka" < [email protected] > > > mailto:[email protected] > > > > Gesendet: 13.04.2020 12:28:40 > > > Betreff: Re: [Therion] Sketches on doesn't work / legacy > > > survey > > > > > > > > > > > > > > > > > > > > > > > > > > 13. 4. 2020 v 11:20, > > > > Roger Schuster < [email protected] mailto:[email protected] >: > > > > > > > > > > After that I created a scrap with the scanned map > > > > > (projection plan) and scaled it using the scale bar and the scaling > > > > > tool of Xtherion map editor. > > > > > > > > > > > > > > > > > > I’m afraid it will work only for "projection none" as > > > > for sections. > > > > > > > > For plan you should use minimally two stations because > > > > Therion georeferences each scrap according those stations. > > > > > > > > Martin > > > > > > > > > > > > > > > _______________________________________________ > > > Therion mailing list > > > [email protected] mailto:[email protected] > > > https://mailman.speleo.sk/listinfo/therion > > > > > > > > > > > > _______________________________________________ > Therion mailing list > [email protected] > https://mailman.speleo.sk/listinfo/therion >
_______________________________________________ Therion mailing list [email protected] https://mailman.speleo.sk/listinfo/therion
