It's a "Stop 0x0000007B" error, right? This Microsoft KB article has the procedure to fix it:
http://support.microsoft.com/kb/314082 Note that you'll need to boot the drive up in the T30 so you can get into Windows and update the registry as described in the article. -Mike > From: [email protected] > > Hello Group, > > I posted here about a month ago asking if I could physically > swap the hard drive from a T30 into a T40 without other > modifications (BIOS, etc). I finally got back around to that > project and discovered the answer is "No". Both machines are > running XPP. The T30 drive is a 160gb Western Digital Scorpio. > The T40 drive is a Seagate Momentus 80gb. > > After swapping the drives I turn on the T40 and get a blue > screen that informs me there was a hardware or software > change. Next a screen appears that gives me options to boot > into safe mode, safe mode with networking, safe mode with > command prompt, boot with last know good configuration, or > start windows normally. No matter what option I select (and I > tried them all) the blue screen pops back up then the boot > options screen. > > Can anyone offer advice as to how to get around this. I need > to get the data and programs from the 160gb T30 drive (which > is only 40% full) so it can be used in the T40, with > everything intact. I don't have the original XP CD's as both > machines were bought second-hand, but I do have recovery > disks for the T30 if that helps. As always your assistance is > greatly appreciated! > > Mike Williams _______________________________________________ Thinkpad mailing list [email protected] http://stderr.org/cgi-bin/mailman/listinfo/thinkpad
