); SAEximRunCond expanded to false Errors-To: [EMAIL PROTECTED] RETRY Mike Feher wrote: > While it is difficult to read the resistor values on that schematic (and as > Bruce points out not really relevant as the diodes are reverse biased), it > appears that since the varicap is referenced to ground, the 10544A's EFC is > always positive. The 10811A goes from -5 to + 5 as the cathode end of the > diode is referenced to +6.4 volts. All this time I had thought they were > fairly interchangeable. - Mike > > > > Mike B. Feher, N4FS > 89 Arnold Blvd. > Howell, NJ, 07731 > 732-886-5960 > > Mike
Get yourself a better GIF viewer and magnify the image (all component values can then be read), you will find there is an option to connect the varicap cathode to +6.4V just like the 1081. The problem only arises if one has the other option. Bruce _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
