Hi Steve, The connectors aren't that hard to find. Look for 15 position, 2 sided (therefore 30 contacts), 0.156" pin spacing for a board thickness of about 0.067". I picked up a couple from Digikey a year or so ago for my 10544A. Digikey Part # EDC305302-ND. They're from EDAC - part #305-030-520-202. But you should look through the (many) options like wirewrap, solder, right-angle, etc. to get what you need.
Ed Steve Rooke wrote: > I've been trying to find out where I can purchase a connector for a > 10811A but with little success. From the manual it is listed as a > CINCH 250-15-30-210 but searching for that does not turn up anything. > I expect that it's going to be as easy to find as hens teeth over here > in New Zealand but I was hoping to find a supplier, say, in the US who > would ship to here. Anyone know where I should look for this please? > > Thanks, Steve > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
