Hi Ed, Thanks for the pointers. I found them on Digikey, and they will ship to NZ, but the cost is NZ$9 plus NZ$39 for shipping. Just can't see how they can come up with $39 for shipping a single edge connector. Anyway, Bert Kehren, the kind gentleman that he is, is going to send me one now so I shall be a happy chappy.
Many thanks to all of you that have responded on this, it's much appreciated. 73, Steve 2009/3/12 Ed Palmer <[email protected]>: > Hi Steve, > > The connectors aren't that hard to find. Look for 15 position, 2 sided > (therefore 30 contacts), 0.156" pin spacing for a board thickness of > about 0.067". I picked up a couple from Digikey a year or so ago for my > 10544A. Digikey Part # EDC305302-ND. They're from EDAC - part > #305-030-520-202. But you should look through the (many) options like > wirewrap, solder, right-angle, etc. to get what you need. > > Ed > > Steve Rooke wrote: >> I've been trying to find out where I can purchase a connector for a >> 10811A but with little success. From the manual it is listed as a >> CINCH 250-15-30-210 but searching for that does not turn up anything. >> I expect that it's going to be as easy to find as hens teeth over here >> in New Zealand but I was hoping to find a supplier, say, in the US who >> would ship to here. Anyone know where I should look for this please? >> >> Thanks, Steve >> > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > -- Steve Rooke - ZL3TUV & G8KVD & JAKDTTNW Omnium finis imminet _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
