Thanks for the pointers David. 2009/3/12 David Forbes <[email protected]>: > At 4:45 PM +1300 3/12/09, Steve Rooke wrote: >>I've been trying to find out where I can purchase a connector for a >>10811A but with little success. From the manual it is listed as a >>CINCH 250-15-30-210 but searching for that does not turn up anything. >>I expect that it's going to be as easy to find as hens teeth over here >>in New Zealand but I was hoping to find a supplier, say, in the US who >>would ship to here. Anyone know where I should look for this please? >> >>Thanks, Steve >>-- > > Steve, > > The PC board edge connector is still widely made. This EDAC connector > from Digikey might do the trick. > > EDC306150-ND single sided 15 pin .156" pitch > EDC307300-ND double sided 2x15 pin .156" pitch > > -- > > --David Forbes, Tucson, AZ > http://www.cathodecorner.com/ > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. >
-- Steve Rooke - ZL3TUV & G8KVD & JAKDTTNW Omnium finis imminet _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
