Hi Said, not necessary to supply you with a list: Just start the software and open the debug window. You will see all serial communication action. With no device connected just the commands will appeear one below the other. You can use the "window hold" option of the debug window to defeat the scrolling.
There is also a second option: If you supply ME a list of commands that your devices understand then I can detect the device type by the answer to *IDN? and ask the devices just what they understand and leave everything else out. That is the stategy that the software already uses to cover the Z3801/5/15 and the GCRU. Best regards Ulrich > -----Ursprungliche Nachricht----- > Von: [email protected] > [mailto:[email protected]] Im Auftrag von [email protected] > Gesendet: Freitag, 10. Juli 2009 20:23 > An: [email protected] > Betreff: Re: [time-nuts] Stable Z38XX > > > Hi Ulrich, > > any chance you could send me a list of commands you utility > uses as a > minimum command-set so I can cross-check against our > Fury/FireFly GPSDO's? > > There are lots of folks on this list that have our units, and > it would be > great if we could get it up and running for our interface as > an alternative > to GPSCon. > > Thanks, > Said > > > In a message dated 7/10/2009 07:17:31 Pacific Daylight Time, > [email protected] writes: > > Guys, > > after a lot of help coming from Australia (thank you Hal and > Kit) there is > a > stable version of my Z38XX utility available. It handles the > Z3801, the Z3805, the Z3815 and the GCRU. > > It is available from the usual place. Enjoy! > > Ulrich Bangert > www.ulrich-bangert.de > Ortholzer Weg 1 > 27243 Gross Ippener > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
