I am aware of the connection issue but I can't find the connectors. Are they still available or should I change both the chassis connector and mating connector to something that I can find?
Thanks, Joe -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Tom Van Baak Sent: Saturday, July 18, 2009 10:45 PM To: Discussion of precise time and frequency measurement Subject: Re: [time-nuts] AC cord or connector for 5061A > Does anyone know of a source for a power cord for the 5061A (or 5061B, > 5065A, etc.)? I am looking for 3 cords or the connector that mates > with AC connector on the back. > > The AC Cord is HP part number 1251-2457 and the connector that mates > with the connector on the back is a Cannon MS3106A-18-22SW. > > Thanks in advance. > > Joe See if this helps. http://www.leapsecond.com/museum/hp5065a/conn.htm Best to open the bottom to make sure your unit has pins that match the schematic. /tvb _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
