I put them on -bay every now and then but they bring big bucks.
Try this link for the connector only,
http://www.peigenesis.com/itt-cannon-connectors.html
You may alter your search and include Military Connectors or Military power
cords as that was common on some of the older Military versions of HP
equipment.
Phil
----- Original Message -----
From: "J. L. Trantham" <[email protected]>
To: "'Tom Van Baak'" <[email protected]>; "'Discussion of precise time and
frequency measurement'" <[email protected]>
Sent: Saturday, July 18, 2009 11:58 PM
Subject: Re: [time-nuts] AC cord or connector for 5061A
I am aware of the connection issue but I can't find the connectors. Are
they still available or should I change both the chassis connector and
mating connector to something that I can find?
Thanks,
Joe
-----Original Message-----
From: [email protected] [mailto:[email protected]] On
Behalf Of Tom Van Baak
Sent: Saturday, July 18, 2009 10:45 PM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] AC cord or connector for 5061A
Does anyone know of a source for a power cord for the 5061A (or 5061B,
5065A, etc.)? I am looking for 3 cords or the connector that mates
with AC connector on the back.
The AC Cord is HP part number 1251-2457 and the connector that mates
with the connector on the back is a Cannon MS3106A-18-22SW.
Thanks in advance.
Joe
See if this helps.
http://www.leapsecond.com/museum/hp5065a/conn.htm
Best to open the bottom to make sure your unit has pins
that match the schematic.
/tvb
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
