Try: http://www.galco.com/scripts/cgiip.exe/wa/wcat/itemdtl.htm?pnum=DMS3106A18-22S-DDK
Bruce J. L. Trantham wrote: > I am aware of the connection issue but I can't find the connectors. Are > they still available or should I change both the chassis connector and > mating connector to something that I can find? > > Thanks, > > Joe > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On > Behalf Of Tom Van Baak > Sent: Saturday, July 18, 2009 10:45 PM > To: Discussion of precise time and frequency measurement > Subject: Re: [time-nuts] AC cord or connector for 5061A > > > >> Does anyone know of a source for a power cord for the 5061A (or 5061B, >> 5065A, etc.)? I am looking for 3 cords or the connector that mates >> with AC connector on the back. >> >> The AC Cord is HP part number 1251-2457 and the connector that mates >> with the connector on the back is a Cannon MS3106A-18-22SW. >> >> Thanks in advance. >> >> Joe >> > > See if this helps. > > http://www.leapsecond.com/museum/hp5065a/conn.htm > > Best to open the bottom to make sure your unit has pins > that match the schematic. > > /tvb > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
