Bruce, I have a 100MHz scope, DVM, frequency counter, signal generator, etc. Sorry, no spec an. I wish I had one.
The first problem is that it fails the first performance test. Instead of 100nS, I get about 10nS and that slowly increases to about 12nS. This is with the unit already warmed up and it is repeatable. I checked the internal reference output and it is very close to 10MHz, so that isn't the problem. Before I go any further, I think I'll open it up reseat all the boards. It couldn't hurt. Joe On Fri, Oct 9, 2009 at 11:51 PM, Bruce Griffiths <[email protected]> wrote: > Joseph Gray wrote: >> I just got a 5370A locally and am going through the performance >> checks. Things are not as they should be. Is there someone who knows >> this unit intimately who would be willing to help me off list? >> >> Joe Gray >> KA5ZEC >> >> > Joe > > What do you have in the way of test gear? > A 100+MHz scope would be useful as well as a spectrum analyser. > > Bruce > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
