Buy another one, they are so cheap :-)
Out of the last lot of five that I bought from the same source, four
work very well and one is marginal - sometimes it locks but it's
noisy, sometime does not lock.
Lamp and xtal voltage are ok, but it jumps up and down by 1E10. Very
positive overall, IMHO.
73 - Marco IK1ODO
At 22.08 02/02/2010, you wrote:
Hello all.
I received an EFRATOM LPRO-101 last week from eBay Fluke 1, and
wired it up last night. The results are not good.
Using a HP 5370B counter with calibration less than one year old,
the frequency reads = 10,000,146,012.9
Power Applied = 24.9Vdc @ 0.30 amps after warm up
Lamp Voltage = 5.9 Vdc
Ext C Field = 2.437
XTL V Mon = 14.67
Bite = 4.57
Bite never goes low.
I just sent an email to the outfit I purchased it from, but would
like to get this working instead of waiting a month or so.
Is it dead? Any thing I can do to revive it?
Any suggestions?
Thanks to all.
Jim N0OBG
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
