Mine worked great for about two weeks, but now BITE goes high again after about 45 minutes. It's quite stable when it's locked. Haven't had a chance to look closer yet.
Dave ----- Original Message ----- From: "Jim" <[email protected]> To: [email protected] Sent: Tuesday, February 2, 2010 2:08:06 PM GMT -07:00 US/Canada Mountain Subject: [time-nuts] EFRATOM LPRO-101 Hello all. I received an EFRATOM LPRO-101 last week from eBay Fluke 1, and wired it up last night. The results are not good. Using a HP 5370B counter with calibration less than one year old, the frequency reads = 10,000,146,012.9 Power Applied = 24.9Vdc @ 0.30 amps after warm up Lamp Voltage = 5.9 Vdc Ext C Field = 2.437 XTL V Mon = 14.67 Bite = 4.57 Bite never goes low. I just sent an email to the outfit I purchased it from, but would like to get this working instead of waiting a month or so. Is it dead? Any thing I can do to revive it? Any suggestions? Thanks to all. Jim N0OBG -- The heart of the wise inclines to the right, but the heart of the fool to the left. Eccl 10:2 (NIV) _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
