Nothing happened here in Southern Arizona (Tucson) in spite of the new medical Marijuana laws !!
73, Dick, W1KSZ -----Original Message----- >From: Flemming Larsen <[email protected]> >Sent: Sep 8, 2011 9:25 PM >To: Discussion of precise time and frequency measurement <[email protected]> >Subject: Re: [time-nuts] 60hz west coast electric grid gone berserk > >Don't know if it is related, but 1.5 million people across Southern >California, Arizona and in Mexico are reported >to have lost power Thursday afternoon due to a "power grid disturbance" >according to various news sources. > >-- FL > > >________________________________ >Fra: tom jones <[email protected]> >Til: [email protected] >Sendt: 18:34 torsdag den 8. september 2011 >Emne: [time-nuts] 60hz west coast electric grid gone berserk > >My 60 hz clocks in las vegas gained 4minutes and 45 seconds approximately. >At 6pm pacific daylight time I ran grid monitoring program which gets time >updates from somewhere in washington state. It showed the grid frequency at >60.06 hz.. >the grid was at 60.06 from 6:00 to 6:15 and mostly likely much earlier than >6pm when I heard the news and looked at the grid frequency. >Power engineers say 60.05hz is where masive power failures woulld prevail. >at around 6:18 frequency was back in tolerance around +.025 hz. > > >This is most likely to do with massive power outage in southern california, >arizona, seen as far as new mexico.. > > > > >_______________________________________________ >time-nuts mailing list -- [email protected] >To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >and follow the instructions there. > >_______________________________________________ >time-nuts mailing list -- [email protected] >To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
