What software do you use for the monitoring? On Thu, Sep 8, 2011 at 9:34 PM, tom jones <epoch_t...@yahoo.com> wrote: > My 60 hz clocks in las vegas gained 4minutes and 45 seconds approximately. > At 6pm pacific daylight time I ran grid monitoring program which gets time > updates from somewhere in washington state. It showed the grid frequency at > 60.06 hz.. > the grid was at 60.06 from 6:00 to 6:15 and mostly likely much earlier than > 6pm when I heard the news and looked at the grid frequency. > Power engineers say 60.05hz is where masive power failures woulld prevail. > at around 6:18 frequency was back in tolerance around +.025 hz. > > > This is most likely to do with massive power outage in southern california, > arizona, seen as far as new mexico.. > > > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. >
_______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.