That will be fine :) Didier KO4BB
Sent from my BlackBerry Wireless thingy while I do other things... -----Original Message----- From: paul swed <[email protected]> Sender: [email protected] Date: Tue, 27 Sep 2011 09:04:32 To: Discussion of precise time and frequency measurement<[email protected]> Reply-To: Discussion of precise time and frequency measurement <[email protected]> Subject: Re: [time-nuts] HP 5065a failure of Rb oscillator problem solved Happy to post the pix someplace but do not have any accounts like facebook etc. Though a great home would be Diddiers site. I could send perhaps 10 of the best pix. By the way looking into the oven you can see the glass rb filter cell. Talk about a classy piece of technology. This ain't no FRS-c. ;-) On Mon, Sep 26, 2011 at 10:38 PM, WB6BNQ <[email protected]> wrote: > Paul, > > As would I. > > Bill....WB6BNQ > > "J. L. Trantham" wrote: > > > Paul, > > > > I would love to see the pictures. > > > > Joe > > > > -----Original Message----- > > From: [email protected] [mailto:[email protected]] On > > Behalf Of paul swed > > Sent: Monday, September 26, 2011 9:16 PM > > To: Time-nuts; paul swed > > Subject: [time-nuts] HP 5065a failure of Rb oscillator problem solved > > > > Hello to the group my trusty HP 5065a Rb ref died. Digging in I > discovered > > that the Rb oscillator was not drawing any current. So it was time to go > > deep inside and see whats in there. Have taken pix of the innards but > they > > are each 2 MB in size. Anyhow it was A12R1 a 1330 ohm resistor that seems > to > > be open. Jumpered a 1500 ohm R in and the lamp re-ignites. Now to install > > appropriate quality and temperature replacement and I should be back in > > business. Must say the 3 levels of magnetic shielding really is > impressive. > > Regards Paul WB8TSL _______________________________________________ > > time-nuts mailing list -- [email protected] > > To unsubscribe, go to > > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > > > > _______________________________________________ > > time-nuts mailing list -- [email protected] > > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
