The word doc is on Diddiers site under Hp_agilent. The name is HP 5065a rubidium osc photo and is 7 MB in size. Good evening everyone. Regards Paul WB8TSL
On Tue, Sep 27, 2011 at 6:21 PM, paul swed <[email protected]> wrote: > Diddier > Thank you. > For everyone else I just completed and emailed a word doc to Bob who > offered to host it. Its 7 MB. Turned out very nicely. You also have my hints > on the project. > Diddier I will upload it shortly to your site also. > The lamps re-installed and the HP5065a is warming up. I do have photo > current now and oven teps are looking correct or at least getting there. > Thanks everyone. > Paul > WB8TSL > > > On Tue, Sep 27, 2011 at 6:01 PM, <[email protected]> wrote: > >> That will be fine :) >> >> Didier KO4BB >> >> Sent from my BlackBerry Wireless thingy while I do other things... >> >> -----Original Message----- >> From: paul swed <[email protected]> >> Sender: [email protected] >> Date: Tue, 27 Sep 2011 09:04:32 >> To: Discussion of precise time and frequency measurement< >> [email protected]> >> Reply-To: Discussion of precise time and frequency measurement >> <[email protected]> >> Subject: Re: [time-nuts] HP 5065a failure of Rb oscillator problem solved >> >> Happy to post the pix someplace but do not have any accounts like facebook >> etc. >> Though a great home would be Diddiers site. I could send perhaps 10 of the >> best pix. >> By the way looking into the oven you can see the glass rb filter cell. >> Talk >> about a classy piece of technology. This ain't no FRS-c. ;-) >> >> On Mon, Sep 26, 2011 at 10:38 PM, WB6BNQ <[email protected]> wrote: >> >> > Paul, >> > >> > As would I. >> > >> > Bill....WB6BNQ >> > >> > "J. L. Trantham" wrote: >> > >> > > Paul, >> > > >> > > I would love to see the pictures. >> > > >> > > Joe >> > > >> > > -----Original Message----- >> > > From: [email protected] [mailto:[email protected]] >> On >> > > Behalf Of paul swed >> > > Sent: Monday, September 26, 2011 9:16 PM >> > > To: Time-nuts; paul swed >> > > Subject: [time-nuts] HP 5065a failure of Rb oscillator problem solved >> > > >> > > Hello to the group my trusty HP 5065a Rb ref died. Digging in I >> > discovered >> > > that the Rb oscillator was not drawing any current. So it was time to >> go >> > > deep inside and see whats in there. Have taken pix of the innards but >> > they >> > > are each 2 MB in size. Anyhow it was A12R1 a 1330 ohm resistor that >> seems >> > to >> > > be open. Jumpered a 1500 ohm R in and the lamp re-ignites. Now to >> install >> > > appropriate quality and temperature replacement and I should be back >> in >> > > business. Must say the 3 levels of magnetic shielding really is >> > impressive. >> > > Regards Paul WB8TSL _______________________________________________ >> > > time-nuts mailing list -- [email protected] >> > > To unsubscribe, go to >> > > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> > > and follow the instructions there. >> > > >> > > _______________________________________________ >> > > time-nuts mailing list -- [email protected] >> > > To unsubscribe, go to >> > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> > > and follow the instructions there. >> > >> > >> > _______________________________________________ >> > time-nuts mailing list -- [email protected] >> > To unsubscribe, go to >> > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> > and follow the instructions there. >> > >> _______________________________________________ >> time-nuts mailing list -- [email protected] >> To unsubscribe, go to >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. >> _______________________________________________ >> time-nuts mailing list -- [email protected] >> To unsubscribe, go to >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. >> > > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
