1 ppm at 10 MHz is 10 Hz. It's been quite a while since I tested it, but if
I remember correctly, if the Tbolt OCXO is off that far the GPS won't lock and
the failure will be rather obvious.
The typical Tbolt oscillator has a DAC gain of 3.5 Hz/V. 10 Hz would be 3V of
DAC offset. Lady Heather can determine your actual oscillator gain constant
using the oscillator autotune function (& A from the keyboard). From that you
can calculate the DAC offset required to get you 10 Hz of shift. Put the unit
into manual DAC control mode and set the DAC voltage to what is needed to shift
the freq that much. See if it locks...
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
