In a message dated 19/12/2011 22:27:22 GMT Standard Time, [email protected] writes:
This thing requires plenty of current to get started. My Tek CPS250 1.2 amp output (A+B parallel) only gets 7.5 volts. Now to scrounge something a bit bigger. --------------------- The 15 volts to pin 1 starts off needing to supply around 1.7 Amps, eventually falling to somewhere between 700 and 800 mA. Pin 4 always draws around 85 to 90 mA from its 5 volt supply. regards Nigel GM8PZR _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
