FWIW. I just hapened on this power supply in an ad. You might find a
fixed voltage one somewhere cheaper, but the price seemed ok, so here it
is for consideration...
http://www.mpja.com/email/12-13-11.asp?r=284759&s=2
Still need the 5 V somehow, so not a complete solution for the 5680A.
On 12/19/2011 3:06 PM, [email protected] wrote:
In a message dated 19/12/2011 22:27:22 GMT Standard Time, [email protected]
writes:
This thing requires plenty of current to get started.
My Tek CPS250 1.2 amp output (A+B parallel) only gets 7.5 volts.
Now to scrounge something a bit bigger.
---------------------
The 15 volts to pin 1 starts off needing to supply around 1.7 Amps,
eventually falling to somewhere between 700 and 800 mA.
Pin 4 always draws around 85 to 90 mA from its 5 volt supply.
regards
Nigel
GM8PZR
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
