Most likely they are 1/16" hex.
On 01/17/12, Chris Albertson<[email protected]> wrote: No need to buy a tool. They drill out really easy but you can also simply punch them out. There are no nuts on the back. The screws bite directly into the fiberglass PCB. Mine were T-16 but many people report they are hex not torx. Maybe it depends on what kind of screw they had around the day it was built. On Tue, Jan 17, 2012 at 2:42 PM, Paul F. Sehorne <[1][email protected]> wrote: > > I received my two FE-5680s today. The first thing I want to do is inspect > the insides. The smallest Torx I have is a too-big T-8. What size is > needed? I'll need to do an internet search for the correct size. > > Thanks, > Paul > > _______________________________________________ > time-nuts mailing list -- [2][email protected] > To unsubscribe, go to > [3]https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. -- Chris Albertson Redondo Beach, California _______________________________________________ time-nuts mailing list -- [4][email protected] To unsubscribe, go to [5]https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. References 1. mailto:[email protected] 2. mailto:[email protected] 3. https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts 4. mailto:[email protected] 5. https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
