Home Depot sells a little HUSKY brand screwdriver tool that
has replaceable bits. It has all the tiny torx sizes.
The correct tool has a black end cap, and costs about $6
-Chuck Harris
Paul F. Sehorne wrote:
I'll give that a try. In the meantime, I'll try to come up with an Torx of the
correct size. Brian said T-7 fit his.
On 1/17/2012 6:07 PM, Chuck Forsberg WA7KGX N2469R wrote:
I have a tool with a number of Allen wrenches. The smallest
of the lot fits the screws that hold the oscillator to the board.
I found it easiest to insert the tool from the other side of the
board rather than unscrewing the usual way. This way I
was able to insert the Allen wrench well into the screw yet
avoid interference with the oscillator box.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
