Hello Rob and The Net:
I like my HP-5384A and use it with a external 10 MHz reference from my
T'Bolt.
At a 10 second gate I can get 11 digits displayed, at 1 sec gate I get
10 digits displayed.
The LCD is NOT back lit. Good to 225 MHz.With HPIB.
It will operate off of a external 9-15 VDC, in place of the AC power.
I also like the FLUKE PM6685/016. I use a external 10 MHz reference.
LCD is backlit, GPIB,
resolution to 12 digits displayed, with 2 MSBs truncated as overflow,
with a 10 second gate.
Longer chassis than the HP.
The PM6685 comes in a Rb version for internal reference.
The HP was < 100$ and the FLUKE was 300$
Original goal was a HP-53132 or a SRS 620, but today they are tooo
pricey for me.
Stan, W1LE on Cape Cod FN41sr
On 1/18/2012 5:45 AM, Rob Kimberley wrote:
I've seen one of these advertised, and wanted to know if any fellow Nuts had
any experience.
Thanks
Rob Kimberley
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
