Stan, Much appreciated Sir!
Rob -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Stan, W1LE Sent: 18 January 2012 16:24 To: Discussion of precise time and frequency measurement Subject: Re: [time-nuts] HP5384A Freq Counter Hello Rob and The Net: I like my HP-5384A and use it with a external 10 MHz reference from my T'Bolt. At a 10 second gate I can get 11 digits displayed, at 1 sec gate I get 10 digits displayed. The LCD is NOT back lit. Good to 225 MHz.With HPIB. It will operate off of a external 9-15 VDC, in place of the AC power. I also like the FLUKE PM6685/016. I use a external 10 MHz reference. LCD is backlit, GPIB, resolution to 12 digits displayed, with 2 MSBs truncated as overflow, with a 10 second gate. Longer chassis than the HP. The PM6685 comes in a Rb version for internal reference. The HP was < 100$ and the FLUKE was 300$ Original goal was a HP-53132 or a SRS 620, but today they are tooo pricey for me. Stan, W1LE on Cape Cod FN41sr On 1/18/2012 5:45 AM, Rob Kimberley wrote: > I've seen one of these advertised, and wanted to know if any fellow > Nuts had any experience. > > Thanks > > Rob Kimberley > > > > _______________________________________________ > time-nuts mailing list -- [email protected] To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
