It's in m12-gps-bit-stream.pdf under www.leapsecond.com/pages/m12/ /tvb ----- Original Message ----- From: Azelio Boriani To: Tom Van Baak ; Discussion of precise time and frequency measurement Sent: Friday, January 20, 2012 4:03 AM Subject: Re: [time-nuts] Leap Second decision postponed
Mmmmh, problem: can't find the @@Tr command details... my M12 gives a response for the @@Tr but at the moment I can't decode it. The Oncore VP has the @@Bl command but the M12 doesn't recognize it. Is the @@Tr an undocumented/secret command? Found a lot of PDFs on the M12 but no @@Tr in them. On Fri, Jan 20, 2012 at 10:08 AM, Azelio Boriani <[email protected]> wrote: Yes, I was too fast, looked again and found only almanac data. I'll try on my M12. On Fri, Jan 20, 2012 at 2:04 AM, Tom Van Baak <[email protected]> wrote: No, @@Be is just the almanac data. That is not what you want. On the M12 to get all the subframes you use @@Tr. /tvb ----- Original Message ----- From: "Azelio Boriani" <[email protected]> To: "Discussion of precise time and frequency measurement" <[email protected]> Sent: Thursday, January 19, 2012 4:14 PM Subject: Re: [time-nuts] Leap Second decision postponed For the Motorola/iLotus receiver the command is @@Be. But the data returned has no such page 18 of subframe 4. Manual says subframe 4 with pages 2 to 5, 7 to 10 or 25 and subframe 5 with pages from 1to 25. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
