Mmmmh, problem: can't find the @@Tr command details... my M12 gives a response for the @@Tr but at the moment I can't decode it. The Oncore VP has the @@Bl command but the M12 doesn't recognize it. Is the @@Tr an undocumented/secret command? Found a lot of PDFs on the M12 but no @@Tr in them.
On Fri, Jan 20, 2012 at 10:08 AM, Azelio Boriani <azelio.bori...@screen.it>wrote: > Yes, I was too fast, looked again and found only almanac data. I'll try on > my M12. > > > On Fri, Jan 20, 2012 at 2:04 AM, Tom Van Baak <t...@leapsecond.com> wrote: > >> No, @@Be is just the almanac data. That is not what you want. >> On the M12 to get all the subframes you use @@Tr. >> >> /tvb >> >> ----- Original Message ----- From: "Azelio Boriani" < >> azelio.bori...@screen.it> >> To: "Discussion of precise time and frequency measurement" < >> time-nuts@febo.com> >> Sent: Thursday, January 19, 2012 4:14 PM >> Subject: Re: [time-nuts] Leap Second decision postponed >> >> >> For the Motorola/iLotus receiver the command is @@Be. But the data >>> returned >>> has no such page 18 of subframe 4. Manual says subframe 4 with pages 2 to >>> 5, 7 to 10 or 25 and subframe 5 with pages from 1to 25. >>> >> >> >> >> ______________________________**_________________ >> time-nuts mailing list -- time-nuts@febo.com >> To unsubscribe, go to https://www.febo.com/cgi-bin/** >> mailman/listinfo/time-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts> >> and follow the instructions there. >> > > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.