OK, thank you for your help. On Fri, Jan 20, 2012 at 11:04 PM, Tom Van Baak <t...@leapsecond.com> wrote:
> It's in m12-gps-bit-stream.pdf under www.leapsecond.com/pages/m12/ > /tvb > > ----- Original Message ----- > From: Azelio Boriani > To: Tom Van Baak ; Discussion of precise time and frequency measurement > Sent: Friday, January 20, 2012 4:03 AM > Subject: Re: [time-nuts] Leap Second decision postponed > > > Mmmmh, problem: can't find the @@Tr command details... my M12 gives a > response for the @@Tr but at the moment I can't decode it. The Oncore VP > has the @@Bl command but the M12 doesn't recognize it. Is the @@Tr an > undocumented/secret command? Found a lot of PDFs on the M12 but no @@Tr in > them. > > > On Fri, Jan 20, 2012 at 10:08 AM, Azelio Boriani < > azelio.bori...@screen.it> wrote: > > Yes, I was too fast, looked again and found only almanac data. I'll try > on my M12. > > > > On Fri, Jan 20, 2012 at 2:04 AM, Tom Van Baak <t...@leapsecond.com> > wrote: > > No, @@Be is just the almanac data. That is not what you want. > On the M12 to get all the subframes you use @@Tr. > > /tvb > > ----- Original Message ----- From: "Azelio Boriani" < > azelio.bori...@screen.it> > To: "Discussion of precise time and frequency measurement" < > time-nuts@febo.com> > Sent: Thursday, January 19, 2012 4:14 PM > Subject: Re: [time-nuts] Leap Second decision postponed > > > > For the Motorola/iLotus receiver the command is @@Be. But the data > returned > has no such page 18 of subframe 4. Manual says subframe 4 with > pages 2 to > 5, 7 to 10 or 25 and subframe 5 with pages from 1to 25. > > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.