I know I repeat my self. I have done so far four sewer vents using a 4 way PVC splitter, sanding the side stubs down and glue a white GPS antenna flush on the top. 4 way so air comes in or out on the sidesRun the coax down the inside of the pipe, fish it out at the best location, seal the hole and from the outside it does not attract any attention. If you can not find a 4 way use a coupling and with circular saw drill some holes into the side for venting. Bert Kehren In a message dated 6/11/2012 11:52:00 A.M. Eastern Daylight Time, albertson.ch...@gmail.com writes:
On Mon, Jun 11, 2012 at 3:28 AM, Bob Camp <li...@rtty.us> wrote: > Hi > > I was concerned about the appearance before I did the first one. After > putting several up, they all look pretty good. The mast portion looks > straight from the ground and it's actually smaller than any conventional > mast. The black paint does indeed help out a little in hiding the tee it's > self. I've tried camouflaging the masts. Paint the upper parts sky blue with puffs of white spray paint over the blue I paint the bottom part black or dark green. Not perfect, I have a 40 foot pole on the back yard fence that is still visible from the street but maybe it helps. Battle ship grey works well too. Chris Albertson Redondo Beach, California _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.