Sounds like a left over Y2K problem.
Regards.
Max. K 4 O DS.
Email: m...@maxsmusicplace.com
Transistor site http://www.funwithtransistors.net
Vacuum tube site: http://www.funwithtubes.net
Woodworking site
http://www.angelfire.com/electronic/funwithtubes/Woodworking/wwindex.html
Music site: http://www.maxsmusicplace.com
To subscribe to the fun with transistors group send an email to.
funwithtransistors-subscr...@yahoogroups.com
To subscribe to the fun with tubes group send an email to,
funwithtubes-subscr...@yahoogroups.com
To subscribe to the fun with wood group send a blank email to
funwithwood-subscr...@yahoogroups.com
----- Original Message -----
From: "Joseph Gray" <jg...@zianet.com>
To: "Discussion of precise time and frequency measurement"
<time-nuts@febo.com>
Sent: Sunday, January 13, 2013 10:28 PM
Subject: Re: [time-nuts] Z3801A trouble
Forcing the date on power up worked, although a bit strangely. I
entered "2013,01,14" and got an "out of range" error. The date then
showed as "14 Jan 2007" briefly, before showing "14 Jan 2013".
Joe Gray
W5JG
On Sun, Jan 13, 2013 at 9:17 PM, Joseph Gray <jg...@zianet.com> wrote:
I just tried manually putting the unit into holdover and setting the
date. Same error. I'll have to try power cycling.
Joe Gray
W5JG
On Sun, Jan 13, 2013 at 8:57 PM, Hal Murray <hmur...@megapathdsl.net>
wrote:
jg...@zianet.com said:
I did that command earlier, but got an error. I just tried it again and
I
get the same error:
-221 "Settings conflict"
I don't remember any troubles. I wasn't using anything complicated like
SatStat.
You might have to set the time when it doesn't know it. Try power
cycling
and set the time before it finds the satellites and time.
--
These are my opinions. I hate spam.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
