I looked at a copy of the 3200 manual I found a while ago. I used to
have a bunch of PTS stuff on my web pages but was asked by the company
to take it down. I think KO4BB manual pages have the same issue. Do you
have the manual?
It doesn't look like there is anything unexpected in the interface.
Sounds like something is broken in the path for your 8-weighted bit
(from pin 42 on the BCD connector according to the manual's table).
Pete's guidance may be helpful.
On 3/1/2013 10:42 AM, Iban Cardona wrote:
Hi,
I'm traying to use to program the bcd interface of a PTS 3200.
My truble us tha the 100Mhz decade 8 value bit is ignored by the PTS,
then if I send 800Mhz to the PTS dont get output, and if send 900Mhz
then I get 100Mhz.
I checked the unit and the hardware looks OK. And my code is working
well in another PTS units like the 620.
The 3200 have some trick?
Thanks for all
73! Iban
eb3frn
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
