Thanks everyone. I have some digging to do I see. Would love to use it on a more modern system. Regards Paul.
On Wed, Nov 20, 2013 at 1:53 PM, John Miles <[email protected]> wrote: > > -----Original Message----- > > From: [email protected] [mailto:time-nuts- > > [email protected]] On Behalf Of Lizeth Norman > > Sent: Wednesday, November 20, 2013 8:43 AM > > To: Discussion of precise time and frequency measurement > > Subject: Re: [time-nuts] EZGPIB Question > > > > The programming of the ENET/100 has to be done with an older ver of > > Labview > > (7.1 IIRC), something that has no later than win 2k as an operating > system. > > I had one of these and went through the setup of the ip address. Once it > > worked, it was like a hardware controller. (using LV 8.0) > > No personal experience, but apparently it can be done with a third-party > utility as well. Search http://www.ke5fx.com/gpib/faq.htm for the term > "GPIB-ENET" and you'll (eventually) find W2HX's instructions. > > -- john, KE5FX > Miles Design LLC > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
