... LED goes out ... I though so but just wanted to make sure. I've purchased a 2nd set and will see how that behaves. Also ordered a few of the DE-15 (if that is the correct way of saying it) connectors. The short pin concept seems to have not been a great idea.
-pete On Sun, Nov 16, 2014 at 12:40 PM, Bob Camp <[email protected]> wrote: > Hi > > On all my box pairs, the “NO GPS” lights all go out on all boxes once > everything is “GOOD” as you define it. A properly operating pair will have a > STBY light (and only that light) on one box. The other box will have only the > ON light lit. > > Based on what I’ve seen. I’d suspect the cable between the two units as the > source of (almost) any problem before I’d dig into the rest of the system. > > Bob > >> On Nov 16, 2014, at 3:29 PM, Pete Lancashire <[email protected]> wrote: >> >> Like to confirm >> >> It has been said ... >>> When you apply power, all the LEDs on the front panel will flash. The >>> "NO GPS" light will continue flashing until you connect a GPS antenna. >>> Once it sees a satellite, the light will stop flashing and remain on. >>> The unit will conduct a self-survey for several hours. Eventually, if >>> all is well, the Z3812A ("REF 0" on its front panel) will show one >>> green "ON" light and the Z3811A ("REF 1") will show one yellow "STBY" >>> light. This means that the Z3812A is actually transmitting its 15MHz >>> output, and the other one is silently waiting to take over if it >>> fails. >> >> Is this correct about the "NO GPS" LED ? >> >> Once the survey is over, and the GPS is considered to be "GOOD", should >> the yellow NO GPS LED be lit ? >> >> For me after being on for a while the LED for me are >> >> REF 1 >> NO GPS ON solid - this is the one I'm asking about >> Fault OFF >> STBY ON >> ON OFF >> REF 0 >> NO GPS ON >> FAULT OFF >> STBY OFF >> ON ON >> _______________________________________________ >> time-nuts mailing list -- [email protected] >> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
