Hello! Current version of NTP supports Motorola Oncore and PPS. Take a look at http://support.ntp.org/bin/view/Support/ConfiguringMotorolaOncoreRefclocks
Edésio On Wed, Nov 26, 2014 at 11:49:59AM -0500, xaos wrote: > Hello everyone. > > Currently my Stratum 1 NTP server is made up of the following: > > Pentium 4 Motherboard, Single core, 1.4GHz., 1GB memory > Slackware Linux, 11.0.0 > PPSkit-2.1.7 Kernel > uname -a: > Linux timelord 2.4.33.3-NANO #1 Fri Nov 12 21:28:51 EST 2010 i686 > pentium4 i386 GNU/Linux > > Motorola, GPS Receiver Version: 3, Revision: 1, Software Date: 1A30, > Model: R5222U1114/[UT], Serial: R0AZSU > > As far as I know the PPSKit was never released for the > later kernels and this machine is showing it's age. > I want to get a new box and run CentOS 7 on it. > > Question: How do I setup NTP with a 1 PPS from serial port > and the Motorola receiver hooked up? > > I hope that some here have done this already and > I wont have to start from scratch. > > I was thinking about the Atom driver? > How do I tell the driver to use the data from the serial port? > > Any help would be greatly appreciated. > > George, N2FGX > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
