Check out the synergy m12 eval board. It's about $100 with the m12m on it and a little less if you're going to install your own.
The most recent ftdi in-tree driver will automatically support the adapter. Previous versions you need to echo the VPI to the sys tree interface of the ftdi_sio driver - which is trivial to do in rc.local. On Wednesday, November 26, 2014, Paul <[email protected]> wrote: > On Wed, Nov 26, 2014 at 11:49 AM, xaos <[email protected] <javascript:;>> > wrote: > > > Question: How do I setup NTP with a 1 PPS from serial port > > and the Motorola receiver hooked up? > > > > You'll want to review the documents at ntp.org and the list < > http://lists.ntp.org/listinfo/questions>. > The folks there will be happy to assist you. > > There are two important points: > > 1) Until 4.2.8 is released you'll want to build a recent version of 4.2.7. > Don't use 4.2.6 > > 2) Review the many and varied posts on the subtleties of using PPS via ATOM > or as part of a refclock like ONCORE < > http://www.eecis.udel.edu/~mills/ntp/html/drivers/driver30.html>. It can > have surprising side-effects. > _______________________________________________ > time-nuts mailing list -- [email protected] <javascript:;> > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
