I forget the size of the pins on the Thunderbolt, but, I bought a crimper tool for Molex pins a while ago for a rather good price and really like it. This will crimp multiple gauge Molex pins and as I mentioned is very reasonably priced.. Shipping to Oz is another matter :).. 73 - Mike
http://www.powerwerx.com/search.asp?q=ct-oem Mike B. Feher, EOZ Inc. 89 Arnold Blvd. Howell, NJ, 07731 732-886-5960 office 908-902-3831 cell -----Original Message----- From: time-nuts [mailto:[email protected]] On Behalf Of Matt Robert Sent: Monday, June 08, 2015 6:29 AM To: [email protected] Subject: [time-nuts] Thunderbolt power connector crimper Hi Guys, I am currently in the process of completing my Thunderbolt project and I need to find a suitable crimper to attach wires to the pins that go inside the power connector. The only reference I can find is on this page here ( http://www.prc68.com/I/ThunderBolt.shtml) that talks about the official Molex tool which is scarily expensive, and the page also mentioned a Radioshack tool that I can't find any further details on. Can someone please point me in the right direction of a suitable crimper for the Molex 538-16-02-0103 pins. Cheers, Matt VK2LK _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
