On 2/28/2016 7:01 AM, Bob Camp wrote:
Hi It’s not an electrical issue as much as a heat issue …. Before you start, consider that you will be doing something like: Move trimmer 1 turn CW Wait 10 minutes read frequency Move trimmer 1 turn CW wait / read Move trimer 1/2 turn CCW wait / read Move trimmer 1/4 turn CW wait / read Move trimmer 1/8 turn CCW wait / read Move trimmer 1/16 turn CW wait / read Move trimmer 1/32 turn CW wait / read That is indeed an ideal version. You likely will do multiple steps at each of the stages rather than get it right the first time. The part needs to be warmed up for a few days before you can get to the 1/32 turn level. You also need a good standard to compare to. Bob
Instead of that, start with the pot at max temp, and have the counter make measurements at, say, 1 second intervals as the oven warms up.
You can tell by looking at the plot what the peak frequency is. Now that you know the peak frequency you are shooting for, it will take a lot less trial and error to find the oven setting that produces it. Rick _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.