My T-bolt is running on a Power-one International Series HCAS-60W-A supply, hefty enough to run at least 4 more. Ripple and noise measure less than 100 micro-volts peak-to-peak. The T-bolt seems quite happy.
Jeremy On Sunday, February 28, 2016, Dave M <dgmin...@mediacombb.net> wrote: > Pete Lancashire wrote: > >> ... I was using an HP lab supply>>> >> >> Model ? Age ? >> >> My bench has some pretty old HP's even Harrison Lab branded supplies. >> I >> have had to re-cap a few of them. >> In a way it is almost a curse how reliable their supplies were. You >> always got the V and I you wanted so one >> never thought about the filtering getting worse over the years. >> >> Also HP had two variations of their bench supplies. The basic ones >> and the low noise versions. When I need >> to make measurement like this, I make sure I'm using one of the low >> noise/ripple models. >> >> > Adding my few cents' worth to the power supply ripple/noise thoughts, I've > found that the old linear supplies by Power Designs Inc were among the > best, at considerably lower cost than the HP/Harrison Labs units. > Ripple/Noise in the low millivolts and high microvolts, 0.01 - 0.005% > regulation and temperature stability in the neighborhood of 0.01%/degC were > common. > I have a couple on my bench, and they just keep on working. They still > pop up at auction frequently. > > Cheers, > Dave M > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > -- Sent from Gmail Mobile _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.