Most of the time I have seen the MS3106 style connectors used for power on
mil spec applications.
Does this one look like it is right?
http://www.mouser.com/ProductDetail/Amphenol-Industrial/MS3106F14S-1S/?qs=sGAEpiMZZMv%2fye0hRulZR2pdaTIihrgU32yg4H0jMKs%3d
If so, you should be able to get it on the surplus market fairly cheap.
Regards,
Tom
----- Original Message -----
From: "J. L. Trantham" <[email protected]>
To: <[email protected]>; "'Discussion of precise time and frequency
measurement'" <[email protected]>
Sent: Thursday, March 17, 2016 5:56 PM
Subject: Re: [time-nuts] Fw: 5065
Ulrich,
The connectors can be obtained reasonably inexpensively from Galco.
http://www.galco.com/shop/Circular-Connectors
They are a 3 pin circular connector, consisting of three parts, that are
purchased as an 'insert', 'shell', and 'clamp', IIRC. I don't have the
part numbers in front of me but they are the same for the 5061 Cesium
standards.
I can get you the specific part numbers if you can't find it in the
archives.
I used a spare 3 wire extension cord and just cut the end off the cord and
installed the connector to mate with the 5065A and 5061A. I've been told
that the wiring is different between the 5061A and some of the 5065A's but
I've never found a 5065A that was different from my 5061A.
Might want to open the unit and make sure the wiring matches the
schematic.
Good luck.
Joe
-----Original Message-----
From: time-nuts [mailto:[email protected]] On Behalf Of KA2WEU---
via time-nuts
Sent: Thursday, March 17, 2016 9:30 AM
To: [email protected]
Subject: Re: [time-nuts] Fw: 5065
The HP 5065A Rubidium Frequency Standard requires a circular 3 pin
adapter cable that can be plugged into 115V AC outlet.
I checked all cables I have and this particular cable is not finable.
Can the unit set to 110/220 V
Maybe this cable can be purchased or assembled ? ULRICH
_______________________________________________
time-nuts mailing list -- [email protected] To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
