Hi Check the solder joints on the 9 pin serial connector. Your TBolt would not be the first to come back to live after a questionable joint on the PC board was touched up.
Bob > On Mar 20, 2016, at 2:10 AM, Dave Brown <tract...@ihug.co.nz> wrote: > > Are there any circumstances when the Thunderbolt serial port is disabled by > firmware? My TB runs 24/7 but stopped the night before last for no apparent > reason. I only discoverd this when I checked Lady Heather early > yesterday.(19 March) LH had stopped with a 'no data' warning late on the 18th > Feb. I initially restarted LH but to no avail, then powered off the > Thunderbolt briefly-again to no avail. I then left it powered off for over 24 > hrs and restarted it around mid-afternoon today (20 March) and now, after > about four hours running normally, it seems like all is back to normal. Just > running Tboltmon at present but will go back to LH later tonight. > DaveB, NZ > > > > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.