On 3/20/2016 2:10 AM, Dave Brown wrote:
Are there any circumstances when the Thunderbolt serial port is disabled
by firmware? My TB runs 24/7 but stopped the night before last for no
apparent reason. I only discoverd this when I checked Lady Heather
early yesterday.(19 March) LH had stopped with a 'no data' warning late
on the 18th Feb. I initially restarted LH but to no avail, then powered
off the Thunderbolt briefly-again to no avail. I then left it powered
off for over 24 hrs and restarted it around mid-afternoon today (20
March) and now, after about four hours running normally, it seems like
all is back to normal. Just running Tboltmon at present but will go back
to LH later tonight.
DaveB, NZ
DaveB
If I read this correctly . You restarted the program and you power
cycled the T-Bolt ?
What does your serial computer interface look like? is it an older style
dedicated DB9 port on the computer or are you using a USB/Serial interface?
. If this occurs again I would also try rebooting the computer before I
power cycled the T-Bolt
Dave
NR1DX
--
Dave
[email protected]
www.ArtekManuals.com
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
